A Guide to Using Clear Care Contact Cleaning Solution
by Vision Optique on Thursday, June 3, 2010 at 12:48pm
Clear Care®
DIRECTIONS FOR USE:
Watch the bubbles go to work!
To ensure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses.
1. Remove and place each lens into the appropriately marked L/R domed lens holder. Rinse with Clear Care® for 5 seconds.
2. Fill the lens case to fill line with Clear Care® and place the lens holder in the case.
3. Tighten the cap and store lenses for at least for six (6) hours or overnight. DO NOT SHAKE THE CASE.
Your lenses are ready to wear after soaking for 6 hours. No final saline rinse is necessary.
WARNINGS:
Do not use flat lens case. Clear Care® only works with the special lens case provided.
Do not remove lenses from case until at least 6 hours later. The solution needs time to neutralize.
Do not rinse with Clear Care® prior to inserting lenses into your eyes. Unless otherwise directed by your eye care professional.
Do not squirt Clear Care® directly into your eyes.
Always follow your eye care professional's instructions. See package insert printed on inside of Clear Care® carton for important safety and other information. Store at room temperature.
DIRECTIONS FOR USE:
Watch the bubbles go to work!
To ensure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses.
1. Remove and place each lens into the appropriately marked L/R domed lens holder. Rinse with Clear Care® for 5 seconds.
2. Fill the lens case to fill line with Clear Care® and place the lens holder in the case.
3. Tighten the cap and store lenses for at least for six (6) hours or overnight. DO NOT SHAKE THE CASE.
Your lenses are ready to wear after soaking for 6 hours. No final saline rinse is necessary.
WARNINGS:
Do not use flat lens case. Clear Care® only works with the special lens case provided.
Do not remove lenses from case until at least 6 hours later. The solution needs time to neutralize.
Do not rinse with Clear Care® prior to inserting lenses into your eyes. Unless otherwise directed by your eye care professional.
Do not squirt Clear Care® directly into your eyes.
Always follow your eye care professional's instructions. See package insert printed on inside of Clear Care® carton for important safety and other information. Store at room temperature.