The Quality
SARO-Gem only uses genuine diamonds. A corresponding diamond certificate accompanies every order. All other parts used in the assembly of our watches are of Swiss origin. By the way - SARO-Gem is the only company worldwide, applying gem
SARO-Gem only uses genuine diamonds. A corresponding diamond certificate accompanies every order. All other parts used in the assembly of our watches are of Swiss origin. By the way - SARO-Gem is the only company worldwide, applying gem
Information
- Location:
- CH-2544 Bettlach
Photos
2 of 10 albumsSee All
Sapphire over Stainless SteelCreated 21 hours ago
Wall PhotosCreated about a week ago
4 of 6 fan photosSee All
|
| ||
|
|
Saro-Gem The cases are generally milled out of INOX 316L (extra low carbon, commonly referred to stainless steel, having 11% chromium content by mass and being highly resistant to corrosion) - in this example the block shown is 2.6 lbs - diameter 55mm & 65mm height. The band holders are "missing" - to mill them in the same set-...up as the case is not possible. They are processed separately, soldered and then baked to the case afterward. The center deco ring as well as the case back are made of the same steel - any of these parts are then either pvd processed (black or gold, @ 10 microns), brushed or sand blasted depending on the variant. Case parts in solid Gold (white or yellow) as well as Platinum are available as well.
Saro-Gem A close-up of the milled case and case back. The push buttons are screwed in, other methods include the use of self-lock nuts which we don't use. We add rubber gaskets on both the stem (2) as well as the inside of the pusher. The center crown stem uses dual gasket sealing too. Unlike manufacturers which put the gasket ...in the crown itself - gaskets on the stem will not see wear due to a crown being screwed down. From a service aspect, the gaskets are quick to be replaced.
Saro-Gem This close-up shows the dial post deposition of the gold-dust and pre application of the dial printing and stone setting. Initially, the dial does not spot the final color, in this case the dark blue as shown to the left but more of a black surface. The flash of the camera makes this look like a copper tone. The final ...dial reveals the details nicely. No anti glare process is used on the sapphire glass - 1st, we experienced that the glass becomes brittle, secondly the light would not reflect the way intended to articulate the diamonds and gold-dust feature.
Saro-Gem
You can see a video of the Saro-Gem review here. http://watchandclockforum.com/viewtopic.
Saro-Gem
Check out the latest Saro-Gem review here.
http://ablogtoread.com/saro-gem/saro-gem
ablogtoread.com
Debbie wow...
Saro-Gem
Details:
- black case, polished with lasered band holders
- dark red dial, 8 diamond markers
- gold pvd back plate, pushers start and reset as well as half moon bezel
- fully decorated movement
- black pvd center ring and center pusher, case screws
- black stingray strap, gold pvd dual deployment clasp
10 new photos
Saro-Gem
A quick Survey on customization. You don't have to be a member to be able to vote in this pole. http://watchandclockforum.com/viewtopic.
Watch and Clock Forum Your home for the discussion of timepieces. • View topic - A quick Survey on c
watchandclockforum.com
Can the valued followers of this board provide their view on what they would like to see as a customizable option for a watch?Some options available in the market today vary from dials to certificates stating the owners name and a serial or production number of the model acquired. ...
Saro-Gem
Saro-Gem AQ review http://www.fratellowatches.com/saro-gem-
www.fratellowatches.com
This article is about SARO-Gem. As a watch enthusiast, you might have never heard of them before. No hard feelings, because SARO-Gem is a manufacturer of
Thom The model commissioned by our client had to be of a sporty execution deriven off the 43mm Chrono design. This model features a white matte dial, gold trim, gold bezel with 12 sapphire stones (we call it planet bezel), black center ring and back plate to contrast off and finishing with a gold bracelet and sapphire overlay spotting gold crescent inlays.
Thom BuonGusto 43 model completed to Mr. H. Collins specification 3 of 3
Thom BuonGusto 43 model completed to Mr. H. Collins specification - 2 of 3
Thom A BuonGusto 43 model completed to Mr. H. Collins specification - Black Dial, Gold lettering and Gold-Dust dial finish with gold/hour and minute, Half-Moon bezel in Inox, Black PDV pushers/center ring/back ring, Sapphire band in charcoal with white gold crescents
