Photos
Reviews
4.9
35 Reviews
Tell people what you think
Peter Giovannotto
· October 24, 2017
Bought two rifles through Marc and it was an awesome experience. Doesn't hurt that the rifles also shoot ridiculously well.

They were shipped to me in NC and when the box got opened up at the gun sh...op, a crowd formed around the rifles to check them out and take pictures. See More
Tim Hill
· October 2, 2017
Marc ALWAYS does an exceptional job building a rifle! His customer service is first class! Thanks again for the hard work and first class rifle!
Thomas Hogue
· September 18, 2016
Marc and crew put together the most accurate rifle I own, and I own/have owned rifles from most of the "big boys" out there. It's fit and finish is second to none, and load development has never been ...so easy, since I couldn't get it to shoot over 1" in all 6 loads I tried, including a load that was under 1/4" over 5 rounds. Thank you guys for the craftsmanship and pride in your work. I can't wait for my next build See More
Dylan Todd
· October 25, 2015
I am no expert when it comes to long range shooting but I sure feel like one when I'm behind one of Marc's rifles. I purchased a 338 LM from Marc around a year ago. First trip to the range I shot th...e best groups of my life with factory ammo none the less. The rifle is perfect in every way and the customer service is the best I have experienced with any manufacture. Thanks Marc! See More
David Wasson
· November 24, 2015
Marc built a custom 30-06 for me earlier this year for my first foray in to long range shooting. I just completed a 3 day class with The Ballistic Edge & LMS Defense & was able to get on paper within... 10 rounds at 1000 yards. While I'm a rookie to long range, I always had 100% confidence in the gun. See More
Calico Jack
· August 17, 2014
Marc is an absolutely awesome machinist. His rifles are meticulously built with a heavy dose of pride thrown in. Which is becoming hard to find these days. His rifles are built to shoot. Very accurate... and smooth. And some of the greatest customer service I've come across in the industry. I couldn't be happier with my spartan 6.5 Creedmoor. Will definitely be looking forward to doing business with spartan precision in the future. See More
Steve Scherf
· December 24, 2015
They are the best. They did a beautiful barrel and receiver job for me recently. It turns out the chassis I bought had problems, so they machined it for me on the spot, until the receiver would fit co...rrectly. They went above and beyond. See More
John Montgomery
· January 26, 2015
Customer service is top notch! After the sale service is what its all about and I can't say enough about how pleased I am with how I've been treated. I've always received immediate responses to all my... stupid questions and concerns. Thanks again! See More
Jerry Fan
· October 17, 2014
I had the pleasure of working with Spartan some time ago and can't say enough good things about their work, but more importantly, the quality of the staff. It's been a while since I got the rifle back... and wanted to say again thanks to you guys there. See More
Brian Taylor
· October 21, 2015
Marc runs an awesome shop with amazing rifles!! First-class service!! He went above and beyond to get my rifle ready for hunting season, plus the gun shoots like a dream! Extremely accurate! I look fo...rward to many more gun builds with him. See More
Brian Callaway
· October 8, 2016
If you want the best Spartan is the place! Marc and his crew do beautiful work and provide top notch service.
Terry Mohney
· April 18, 2017
They got some good chit on here...and they use a lot of attention to detail on there rifles....
Alton Johnson
· May 30, 2015
Sent my rig into Marc to work it over and add a barrel in 6.5 x 47. Now begins the thrill of the build. Thanks Marc. Customer service has been outstanding!
Mike Soulié
· March 19, 2015
His dedication and commitment to whatever he does makes the difference, great work Marc!
Rich Rupe
· July 15, 2014
Tier 1 equipment and customer service to match
Hugh H Tanner
· July 17, 2014
One of the best smiths out there Marc does a GREAT job
Bob Yager
· October 30, 2014
I give u 5 stars beautiful rifles keep up the good work
Videos
Just another rough day at the field office throwing bullets at 1200yds. Caught some pretty good trace in this clip. -Vic
55
5
Sentinel stocks about to be built into rifles and shipped.
46
9
Some seamless threadcapping.
303
35
Posts

The Spartan "Bottom Dweller" Short Action detachable mag box for Acuraccy International Type mags. Fits the most commonly used 'M5' inlet. $239 plus shipping. Call or email sales@spartanrifles.com. Mon-Fri 9am-5pm PST 408-451-9850

No automatic alt text available.
Spartan Precision Rifles

The Spartan "Bottom Dweller" Short Action detachable mag box for Acuraccy International Type mags. Fits the most commonly used 'M5' inlet. $239 plus shipping. Call or email sales@spartanrifles.com. Mon-Fri 9am-5pm PST 408-451-9850

Spartan Precision Rifles added 2 new photos to the album: Builds — with Manners Composite Stocks.
February 17 at 12:33pm
Posts

Perfectly symmetrical 10 point taken by this happy guy with his Spartan 6.5 Creedmoor.

Image may contain: 1 person, outdoor

Clayton and his wife are putting their Spartan built 6.5X284’s to good use.

Image may contain: 1 person, smiling, outdoor
Image may contain: 1 person, smiling
Image may contain: 1 person, smiling, standing, outdoor and nature
Image may contain: 1 person, smiling, outdoor and nature

**SOLD** FOR SALE and available for immediate delivery. Spartan integral receiver by Defiance, Proof carbon wrapped barrel chambered in 308 and cut to a finished length of 24”, McMillan A3-5 stock with adjustable cheek piece and marble swirl finish 50% olive/25% tan/25% black, Spartan Bottom Dweller DBM with one 10 round AICS mag and a Timney trigger. Previous customer had to cancel so it’s at a reduced price of $5,300. Contact us at 408-451-9850 or sales@spartanrifles.com

No automatic alt text available.

We are very happy with our new “Bottom Dweller” bottom metal for A.I. pattern detachable magazines. It’s cut with an M5 footprint which is very common, has an enlarged beveled entry and longer depth of purchase on the magazine which greatly aids in loading quickly under pressure, is strong enough to jam into a barricade and has a one piece oversized release tab which sweeps back towards the trigger finger for an easy release. Short video coming soon! Again we do not have our new website up yet so you’ll have to email or call the shop to purchase. Comes with 7075 pillars and screws for $239 plus shipping. Dealer inquiries welcome.

No automatic alt text available.
Installation of SPR Kopis Muzzle Brake on threaded barrel with thread lubricant already applied. Muzzle brake is available in 5/8X24 thread size for now. We’...
youtube.com

Congrats to Josh K. in MT for taking this solid 190 class buck with his 6.5 SAUM Montana Rangemaster.

Image may contain: 1 person, outdoor

Nico Detour doing work 👍

Image may contain: 2 people, people smiling
Nico Detour

Gotta love my @spartan_rifles #oldbetsy she did her part and carried the team. With 3 stage wins and 2 second place stages. The confidence I have with my setup ...shooting factory @primeammo and that crystal clear @usoptics_official makes all the difference. Thank you to all my great friends and sponsors who have helped me on my journey. #jcsteeltargets

See More

Vic making bolt knobs on the TL-1

It looks like you may be having problems playing this video. If so, please try restarting your browser.
Close
2,520 Views
2.5K Views

Just finished up these police sniper guns....
Spartan 16" .308's with McMillan A3-5 stock painted with our drought camo. Badger Ordnance M5 enhanced DBM, Vortex Razor scope and accessories. Timney Trigger, and Griffin Armament Ultralight suppressors.

I think some guys are gonna be super happy

Image may contain: outdoor

This beauty went off to its new home today...
Spartan built .338 Lapua
McMillan Fiberglass Stocks painted in our Drought Tiger Stripe
Timney Triggers
Vortex Optics rings and Razor Gen2...
American Precision Arms Fat Bastard Brake
Badger Ordnance Bottom metal and AI mags.

See More
Image may contain: outdoor
No automatic alt text available.
Sniper's Hide, LLC

Why does Marc Soulie even bother his Spartan Precision Rifles are boring

Spartan team shooter Nico Detour tearing it up!

It looks like you may be having problems playing this video. If so, please try restarting your browser.
Close
Posted by Nico Detour
3,114 Views
3,114 Views
Nico Detour

"I just wanna go fast!"